History

Ryan 1184e0d9be Adjust keycode alignment around `QK_BOOT` (#23697 )		2024-05-11 16:50:48 +01:00
..
rev_a	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
rev_b	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
rev_c	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
rev_d	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
rev_d_ansi	Data-Driven Keyboard Conversions: 0-9 (#23357 )	2024-03-30 13:51:57 +00:00
rev_d_iso	Data-Driven Keyboard Conversions: 0-9 (#23357 )	2024-03-30 13:51:57 +00:00
rev_e	Migrate build target markers to keyboard.json - 0AB (#23488 )	2024-04-12 23:34:44 +01:00
rev_e_ansi	Migrate build target markers to keyboard.json - 0AB (#23488 )	2024-04-12 23:34:44 +01:00
rev_e_iso	Migrate build target markers to keyboard.json - 0AB (#23488 )	2024-04-12 23:34:44 +01:00
readme.md	[Keyboard] Add Waffling60 revision e (#21664 )	2023-10-26 23:42:11 -07:00

readme.md

waffling60

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.

More info: https://geekhack.org/index.php?topic=103531.0

Keyboard Maintainer: 4pplet
Hardware Supported: waffling60

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_a:default
make 4pplet/waffling60/rev_b:default
make 4pplet/waffling60/rev_c:default
make 4pplet/waffling60/rev_d:default
make 4pplet/waffling60/rev_e:default
make 4pplet/waffling60/rev_d_ansi:default
make 4pplet/waffling60/rev_d_iso:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.

Alternative option if the firmware is already pre-flashed:

Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.