History

Ryan 5c592ab0c0 Delete trivial keymap readmes (#23714 )		2024-05-17 23:49:29 +01:00
..
keymaps/default	Delete trivial keymap readmes (#23714 )	2024-05-17 23:49:29 +01:00
left_pm	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
right_pm	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
config.h
info.json	Migrate features and LTO from rules.mk to data driven (#23307 )	2024-03-30 10:57:30 +00:00
readme.md
rules.mk	Migrate features and LTO from rules.mk to data driven (#23307 )	2024-03-30 10:57:30 +00:00

ogurec

ogurec is a reversible 12u x 3u ortholinear keyboard that offers left-sided and right-sided PM placement.

The default ogurec keymap is for left-sided PM placement.

When flashing ogurec with the PM soldered onto the right side, follow the second example below and use: make ogure/right_pm:default

Keyboard Maintainer: H. Bond
Hardware Supported: ogurec (https://github.com/drhigsby/ogurec)
Hardware Availability: open source 3DP case available here https://github.com/drhigsby (case creator: https://github.com/dpalka15)

Make example for this keyboard (after setting up your build environment):

make drhigsby/ogurec:default
make drhigsby/ogurec/right_pm:default

To place the keyboard into bootloader mode, solder a reset switch onto the PCB and press it OR short the GND and RST pins on the pro micro.

Flashing example for this keyboard:

make drhigsby/ogurec:default:flash
make drhigsby/ogurec/right_pm:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.