History

Ryan d09a06a1b3 Update GPIO API usage in keyboard code (#23361 )		2024-05-03 15:21:29 +10:00
..
f401	Data-Driven Keyboard Conversions: M, Part 2 (#23601 )	2024-04-27 03:17:40 +01:00
f411	Data-Driven Keyboard Conversions: M, Part 2 (#23601 )	2024-04-27 03:17:40 +01:00
keymaps	Remove requirement for `keymap_steno.h` include in keymaps (#22423 )	2023-11-12 18:25:46 +11:00
wide_oled	Data-Driven Keyboard Conversions: M, Part 2 (#23601 )	2024-04-27 03:17:40 +01:00
config.h	Migrate some dip switch config to info.json (#22437 )	2023-11-23 08:33:59 +11:00
glcdfont.c
halconf.h
info.json	Data-Driven Keyboard Conversions: M, Part 2 (#23601 )	2024-04-27 03:17:40 +01:00
matrix.c	Update GPIO expander API naming (#23375 )	2024-03-29 16:57:21 +00:00
mcuconf.h
post_rules.mk
readme.md
rules.mk	Data-Driven Keyboard Conversions: M, Part 2 (#23601 )	2024-04-27 03:17:40 +01:00
sugarglider.c	Update GPIO API usage in keyboard code (#23361 )	2024-05-03 15:21:29 +10:00
sugarglider.h

mechwild/sugarglider

The Sugar Glider is an ergonomic keyboard with columnar stagger and a central touchpad, OLED, and status LEDs.

Make example for this keyboard (after setting up your build environment):

make mechwild/sugarglider:default

Flashing example for this keyboard:

make mechwild/sugarglider:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
Physical reset button: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
Keycode in layout: Press the key mapped to QK_BOOT if it is available. By default this is the top right key on layer 1.